When you think of design, the possibilities are endless!
Avery Dennison has several wall film options. Each of these options are printable on Eco Solvent, Solvent, UV and Latex printers.
MPI 2611
MPI 2611 is the staple of wall film options. It’s a matte, 6 mil calendered film with removable adhesive that can be contour cut or used as a wall mural. The contour cut options can even be printed edge-to-edge. It is recommended for use on smooth interior walls without low to no VOC wall paints. MPI 2611 can be removed in a year with no damage or adhesive residue.
MPI 2631
MPI 2631 Removable Wall Film is available in three finishes: Crushed Stone, Stucco and Canvas. These films are calendered, removable and textured. They’re designed for interior wall murals that have a smooth texture.
MPI 2630
MPI 2630 Permanent Wall Film is available in three finishes: Crushed Stone, Stucco and Canvas. This series is also calendered, textured and designed for wall murals, with a permanent adhesive.
MPI 1405
MPI 1405 EZRS is designed for textured wall surfaces indoors or outdoors. We recommend that you use the film with DOL 6460 laminate.
MPI 1405 EZRS is a glossy polyurethane film with EZ and RS adhesive technology for easy, bubble-free application. During install, heat the film up and use a roller to press it into the wall’s texture and shallow joints. MPI 1405, with DOL 6460, can be used on concrete, brick and stucco for a permanent application until time to remove, which can be done with heat.
Some Extra Tips
• For wall murals, Avery Dennison Graphics recommends a 1 inch overlap on each panel.
• When working with textured films, use banner hem tape on the edges during installation to ensure adhesion.
• Allow solvent inks to outgas for at least 24 hours to prevent edge curl.
• Interior graphics do not have to be laminated.
• Test all surfaces for proper paint surface finish, paint out-gassing and surface-to-substrate adhesion.
See more details on our bulletins page